CLICK HERE to
                   obtain information
                   regarding local
                   dealers in your
                   area

     VP's Traction Adhesive products cannot be sold online due to HAZMAT restrictions.
     Available only through dealers and distributors. Click HERE for contact info

space'

Lane Choice 6™ Track Adhesive

Click to enlarge
VP's premier traction compound! While competitors are generally getting by with 20-year
old technology, Lane Choice 6 is the product of intense and detailed R&D conducted
over the last six years. In heads up testing against every other competitive product,
Lane Choice 6 won every time!

More consistency - Because of its higher viscosity and overall toughness, Lane
Choice 6 performs much more consistently across a wider range of temperatures-from
40 to 120 degrees. Differences in a car's performance between daytime and night are
substantially reduced, and Lane Choice 6 is unaffected by humidity.

Better out of groove performance - Cars can get out of the groove and still get down
the track without having to shut down.

Better starting line toughness - Tracks get fewer bald spots and they're less severe.
LC6 doesn't ball up or roll over onto itself. As a result, cars routinely launch harder and
tracks become faster.

Easier to apply - Lane Choice 6 is packaged ready-to-spray. It requires no mixing, no
mess and there's no need to remember mix ratios. It requires use of teflon seals in spray
equipment and may be diluted with methanol.

More cost-effective - Lane Choice 6 actually achieves better results while requiring
application of less compound and requires no purchase of methanol for mixing.


LC6-Cold

Click to enlarge
LC6-Cold provides the same superior performance in all respects as LC6, but is specifically
formulated for temperatures below 75°F. LC6-Cold actually offers excellent performance up
to 120, so there is a window from 75-120°F in which either LC6 or LC6-Cold will perform
equally well.  


Starting Line Resin (SLR)
SLR is designed for touch-ups that are inevitably required during a weekend of racing,
from bald spots to minor oil or antifreeze drips.  Tracks can first clean these spots with
lacquer thinner or MEK like normal, then cover the spot with SLR and have their track
ready to race in literally less than a minute.

NOTE: LC6, LC6-Cold and SLR are all made ready-to-spray at full strength for easy application. 
LC6-Cold also can be cut 50/50 with methanol, which track tests have shown to yield incredibly
quick curing times, allowing tracks to be race-ready 5-10 minutes after application.




Bite%u2122 Tire Softener
Restores hard race tires to like new condition! Makes rubber compounds softer and stickier
for optimum traction on any track surface. 



World Headquarters     |     San Antonio, Texas     |     Phone  210.635.7744     |     Fax  210.635.7999